Rustic X Desk

Submitted by Ana White on Sun, 02/23/2020 - 17:01
| Print this plan

五星棋牌build your own farmhouse desk with free plans from  uses all off the shelf dimensional boards (no plywood!), easy to build with our step by step plans.

farmhouse desk plans

for about $50 i built a new desk for my bedroom!

we have a desk area in our great room, but my toddler has been crawling all over me.  so i decided i needed a desk behind a door for the next few years. not wanting to spend a small fortune on a desk, i decided to build one.

styled to match our super popular rustic x collection, my new desk is sturdy and beautiful, and very comfortable.

watch me build it:

Rustic X Desk Plans

farmhouse desk dimensions
5 feet wide, 30" tall, about 2 feet deep


Shopping List

五星棋牌3 - 2x4 @ 8 feet or stud length (92-5/8")

五星棋牌2 - 2x6 @ 10 feet 

5 - 2x2 @ 8 feet (i used 2x2 furring strips)

1 - 1x10 @ 6 feet

Common Materials
2 inch finish nails
Cut List

6 - 2x4 @ 28-1/2" - legs

6 - 2x4 @ 17-3/4" - top and bottoms of leg sets

6 - 2x2 @ ~30" - x detailing 

2 - 2x2 @ 17-3/4" - cleats for shelf supports

五星棋牌4 - 1x10 @ 17-3/4" - shelf boards

6 - 2x2 @ about 18-1/2" - measure and cut in the instructions

3 - 2x2 @ 28-1/2" - chair area 2x2s

五星棋牌4 - 2x6 @ 59-1/2" - tabletop

Cutting Instructions

note: i changed the measurements shown in the diagrams at 18" to 17-3/4" so that all the cuts would fit on the boards by just making the base 1/4" less in depth.  this does not change the height or the desktop.



Step 1

drill two 1-1/2" pocket holes on each end of the 2x4s @ 17-3/4".

五星棋牌attach to the legs at the top.

attach bottom with a 3" space underneath.

五星棋牌keep pocket holes on the outsides.

use 2-1/2" pocket hole screws.

build three identical.

Step 2

五星棋牌scribe the x detailing in place in the legs.

cut out on a compound miter saw.

attach with glue and 2" brad nails.

add x detailing to all three.

Step 3

五星棋牌for middle shelf, attach 2x2 cleat with 2" brad nails and wood glue.

五星棋牌do this only for two of the legs.

Step 4

drill 3/4" pocket holes to connect two 1x10s together and attach with 1-1/4" pocket hole screws.

then drill 3/4" pocket holes on all four sides of the shelves (2 on each side) and attach with 1-1/4" pocket hole screws to the sides.

Step 5

五星棋牌take a measurement in between the two legs and cut six 2x2s to this measurement.

五星棋牌drill a single 1-1/2" pocket hole on each end.

五星棋牌then attach with 2-1/2" pocket hole screw and glue.

also attach shelf to the 2x2 with 1-1/4" pocket hole screws through holes drilled in step 4.

Step 6

attach the remaining leg set to the desk with 2x2s and pocket holes.

Step 7

build the desktop first with 1-1/2" pocket holes and 2-1/2" pocket hole screws.

attach base to underside of desktop.

Finishing Instructions
Finish Used
Golden Oak by Varathane
Help Improve This Plan

we apologize if there was an error in this plan. please help us out and report any errors here.



tue, 02/25/2020 - 13:08

how is this desk standing up to hefty weights/using as an office desk type thing? 

五星棋牌must say i am impressed!!  :)

i'm not best at diy but trying to improve..

i'm ok with the basics but this to me seems mind-boggling, but you have made it look easy 

so thanks!

Bryan G Price

wed, 02/26/2020 - 06:09

hello ana,

i made a desk similar to this about a month ago. i like your design better though! the x cross pieces and the addition of the shelf for the printer is something i might even go back and see if i can incorporate into my current design.

thanks for all you do!



五星棋牌wed, 02/26/2020 - 07:27


any chance you can extend this swap the "box" to both sides and then add a 3rd and make an l shape out of this?

also do you know the approximate weight that a shelf could hold, we have a very heavy color laser printer and i worry about supporting it properly.




五星棋牌mon, 03/09/2020 - 06:41

Any student who may need is free to request our writers for assistance from as they are committed to helping clients when they visit .